Canoga-perkins 9145E NID Software Version 4.10 Manuel d'utilisateur télécharger pdf (Page 228)

9145E NID Software User’s Manual Service OAM

Maintenance Associations

216

b. To remove a peer MEP, type 2 and press Enter. You are prompted for the MEP ID

number. Type the number and press Enter.

c. When all the peer MEPs have been configured, type A to accept and press Enter.

d. Press Esc to return to the Maintenance Associations Attributes screen.

NOTE: When you select a MEP ID while creating a maintenance end point from a peer MEPs list

(Figure 11-16), the selected MEP ID becomes local to the device and the rest of the MEP IDs

automatically become peers. You must define MEP IDs in a given MA prior to creating MEP in

the 9145E.

5. You can change the Permissions (Sender ID). Select None, Chassis, Manage,

ChassisManage, or Defer, and press Enter.

6. When you are finished, type A to accept the settings and press Enter.

7. Press Esc to return to the Maintenance Association List screen.

Figure 11-15 Maintenance Association Attributes screen

Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009

9145E-101-1-0 V04.10 00:25:46

----------------------MAINTENANCE ASSOCIATION ATTRIBUTES-----------------------

MD ID: 2 Level: 0

MA ID: 2 Name: port-layer

1) CCM Interval: 1 sec

VLAN Tag Type: S-Tag

VLAN List: 100

2) Add VLAN to VLAN List.

3) Remove VLAN from VLAN List.

4) View/Modify Peer MEPs list.

5) Permissions (Sender ID): None

Select [1-5] for attributes:

------------------------------------Messages-----------------------------------

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 295 296

Pas de commentaire

Canoga-perkins 9145E NID Software Version 4.10 Manuel d'utilisateur Page 228