Canoga-perkins 9145E NID Software Version 4.10 Manuel d'utilisateur télécharger pdf (Page 145)

Port Information 9145E NID Software User’s Manual

Port Configuration

133

5.2.2 Functional Configuration

From the Port Configuration screen, select the Functional Configuration (2) and press Enter. The

Functional Configuration screen opens. The Functional Configuration screen (Figure 5-5)

displays the User and Network port speed and duplex information, and allows you to set the

functions listed below.

Figure 5-5 Functional Configuration screen

You can modify the following functions:

User Port Connector Controls whether the User Port UTP or SFP connector is active,

regardless of what is physically connected. The SPD LED will blink once a second over the

active connector if it is empty. Press the Space bar to select the SFP or UTP connector.

User Port Setting Sets the speed/duplex for the User Port and allows the port to be disabled. If

UTP is selected as the connector, press the Space bar to select 10M Half, 10M Full, 10M Auto,

100M Half, 100M Full, 100M Auto, 1000M Full, 1000M Auto, 10/100M Auto, 10/100/1000 Auto,

or Disabled. If SFP is selected as the connector the speed setting is defined by the SFP.

Net Port Connector Controls whether the Network Port UTP or SFP connector is active,

regardless of what is physically connected. The Spd LED will blink once a second over the active

connector if it is empty. Press the Space bar to select the SFP or UTP connector.

Net Port Setting Sets the speed/duplex for the Network Port and allows the port to be disabled.

If UTP is selected as the connector, press the Space bar to select 10M Half, 10M Full, 10M Auto,

100M Half, 100M Full, 100M Auto, 1000M Full, 1000M Auto, 10/100M Auto, 10/100/1000 Auto,

Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009

9145E-101-1-0 V04.10 10:14:38

----------------------------------FUNCTIONAL CONFIGURATION---------------------

User Port Speed/Duplex 100M/Full

Net Port Speed/Duplex 1000M/Full

MP Port Speed/Duplex Admin down

MGMT UTP Port Speed/Duplex Admin down

1) User Port Connector UTP

2) User Port Setting 10/100/1000M Auto

3) Net Port Connector SFP

4) Net Port Setting 1000M Full

5) RMTF Disabled

6) GigE RMTF Mode Both Ports CP Proprietary

7) LLF Disabled

8) Flow Control Disabled

9) Maximum Frame Size 10000

Select [1-9]:

------------------------------------Messages-----------------------------------

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 295 296

Pas de commentaire

Canoga-perkins 9145E NID Software Version 4.10 Manuel d'utilisateur Page 145