Canoga-perkins 9145E Network Interface Device Software Version 2. Manuel d'utilisateur Page 82

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 112
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 81
9145E NID Software User’s Manual Software Upgrade
Swap Bank After Download and Reset
74
Figure 8-1 Software Upgrade Screen
8.3 Swap Bank After Download and Reset
Option 3 allows you to select automatically swapping banks on reset after a successful download. Select
Yes for automatically swap banks. Select No to have downloaded software remain in the inactive bank.
This option does not generate a reset.
Type
3 and press Enter. Press the Space Bar to cycle between Yes and No.
NOTE: Users will be disconnected when the 9145E is reset.
The flag must be set before the download of the new software while Swap Bank after Download and reset
is set. After downloading software, the message line will read Loads xx.xx on Next Reset.
Canoga Perkins Corp. Ethernet Network Interface Device 12-SEP-2008
Model 9145E-101-2-0 V02.10 F121 02:59:35
---------------------------------------SOFTWARE UPGRADE---------------------------------
Time Since Last Restart 06:29:05
Version File Name File Size
Active Firmware 2.0 9145E-A10-02-00.ZIP 2225458
Inactive Firmware 2.1 9145E-A10-02-01.ZIP 2235776
Bootcode 2.1 9145E-B00-02-10.BIN 337566
1) Software Reset Reset
2) Swap Bank & Reset Swap
3) Swap Bank after
download and reset Yes
4) Get New File with TFTP
Select [1-4]
:---------------------------------------------Messages---------------------------------------------
Extension Port Link U
p
Vue de la page 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 111 112

Commentaires sur ces manuels

Pas de commentaire