Canoga-perkins 9145E Network Interface Device Software Version 2. Manuel d'utilisateur Page 28
- Page / 112
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
9145E NID Software User’s Manual System Configuration
Trap Configuration
20
The System Log contains the log of all enabled Trap events.
1. To configure Traps, select Trap Configuration (2) from the System Configuration menu. The Trap
Configuration menu (Figure 3-13) opens.
2. Select the number of the trap group to change and press Enter. Cycle through the Log Only, Send
Only, Both Log And Send, or Disabled parameters using the Space Bar.
The Master Trap Control setting will override all other trap settings. For example, if the Master Trap
Control is set to Log Only, rather than set to Both Log And Send (as shown), all the other traps will only
log alarm events, regardless of the individual trap settings. If the Master Trap Control is set to Log And
Send, the individual traps will perform according to their individual settings. Setting the Master Trap
Control setting to Disabled will disable all traps.
3. Press Enter to close the editing function and then press Esc to return to the System Configuration
menu.
NOTE: The setting of the Master Trap Control will override all other trap settings.
cpTemperatureOverHighThresholdAlarm cpStatus.my
cpTemperatureHighThresholdAlarmCleared cpStatus.my
cpTemperatureWarningApproachingHigh-
Threshold
cpStatus.my
cpTemperatureHighThresholdWarning-
Cleared
cpStatus.my
cpTemperatureAlarmUnderLowThreshold cpStatus.my
cpTemperatureLowThresholdAlarmCleared cpStatus.my
cpTemperatureWarningApproachin-
gLowThreshold
cpStatus.my
cpTemperatureLowThresholdWarning-
Cleared
cpStatus.my
S F P T r a ps cpSfpRemoved cpSfpStatus.my
cpSfpInsertedInvalid cpSfpStatus.my
cpSfpInsertedValid cpSfpStatus.my
cpSfpTxOk cpSfpStatus.my
cpSfpTxWarning cpSfpStatus.my
cpSfpTxFailure cpSfpStatus.my
- Software Version 2.1 1
- User’s Manual 1
- Table of Contents 3
- About this Manual 7
- How this Manual is Organized 7
- What is New in This Document 7
- Optional Applications 8
- Contacting Technical Support 8
- Document Feedback 8
- Chapter 1 9
- Introduction 9
- 1.3 Three Levels of Security 10
- Chapter 2 11
- Getting Started 11
- 2.1.1 About MIBs 12
- 2.1.2 9145E Set-up 12
- 2.3 Login 14
- 2.4 Main Menu 15
- 2.5 Supported MIBs 16
- Chapter 3 17
- System Configuration 17
- 3.1.3 Host Table 21
- 3.1.4 Trap Table 23
- 3.2 Trap Configuration 27
- Trap Configuration 29
- 3.3 Security Configuration 30
- 3.4 Account Configuration 32
- 3.4.2 Add or Edit an Account 33
- NOTE: SNMP only cannot FTP 34
- 3.5 System Information 35
- 3.9 Hardware Information 41
- Chapter 4 43
- Diagnostics 43
- 4.1 Loopback Setup 44
- 4.2 Latency/Jitter Test 44
- 4.3 PING Generation 47
- 4.4 VLAN Loopback 48
- Figure 4-6 VLAN Loopback 49
- 4.4.2 L2 Ping Generator 51
- 4.5 Cable Diagnostics 52
- Chapter 5 53
- Port Information 53
- 5.1 Link Status 54
- 5.2 Port Configuration 54
- 5.2.1 Hardware Information 55
- 5.2.3 VLAN Configuration 58
- 5.2.4 Port Filters 61
- 5.3 Layer 2 Statistics 64
- Layer 2 Statistics 65
- 5.4 RMON Group 1 Statistics 67
- 61/(62 Blank) 69
- Chapter 6 71
- System Alarms & Logs 71
- 6.1 System Log 72
- 65/(66 Blank) 73
- Chapter 7 75
- Utilities 75
- 7.3 Change Password 76
- 7.4 VT100 Baud Rate 76
- 7.5 PING Generation 76
- 7.6 Static ARP Table 77
- 7.7 Dynamic ARP Table 78
- 7.8 License Manager 78
- 71/(72 Blank) 79
- Chapter 8 81
- Software Upgrade 81
- 77/(78 Blank) 85
- Chapter 9 87
- 802.3AH OAM 87
- 9.1 OAM Control 88
- 9.2 OAM Peer Information 90
- 9.3 OAM Statistics 91
- 9.4 OAM Event Configuration 92
- 9.5 OAM Event Log 92
- OAM Event Log 93
- 87/(88 Blank) 95
- Chapter 10 97
- Class of Service 97
- Configuration 97
- 10.1 CoS Support 98
- 10.2 Classifier Mapping 98
- 10.2.3.2 DSCP Mode 101
- Enter. The cursor 101
- 10.3 Queue Configuration 102
- 10.3.3 Scheduling Scheme 103
- 10.3.4 Weight Parameters 104
- 10.5 Queue Statistics 107
- Appendix A 109
- Acronyms 109
- CANOGA PERKINS CORPORATION 112
Produits connexes et manuels pour Matériel informatique Canoga-perkins 9145E Network Interface Device Software Version 2.
Matériel informatique Canoga-perkins 9145E Standard NID Software Version 1.0 Manuel d'utilisateur
(100 pages)
(100 pages)
Matériel informatique Canoga-perkins 9145E10G Network Interface Device Hardware Manuel d'utilisateur
(55 pages)
(55 pages)
Matériel informatique Canoga-perkins 9145E10G NID Software Version 1.0 Manuel d'utilisateur
(116 pages)
(116 pages)
Matériel informatique Canoga-perkins 9145EMP Network Interface Device Hardware Manuel d'utilisateur
(50 pages)
(50 pages)
Matériel informatique Canoga-perkins 9145EMP NID Software Version 3.1 Manuel d'utilisateur
(202 pages)
(202 pages)
Matériel informatique Canoga-perkins 9145EMP NID Software Version 4.0 Manuel d'utilisateur
(229 pages)
(229 pages)
Matériel informatique Canoga-perkins 9145ELB NID Software Version 4.01 Manuel d'utilisateur
(152 pages)
(152 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.030 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels