Canoga-perkins 9145E Network Interface Device Software Version 2. Manuel d'utilisateur télécharger pdf (Page 39)

System Configuration 9145E NID Software User’s Manual

SNTP Client Configuration

3.7 SNTP Client Configuration

Use the SNTP Client Configuration screen to configure the 9145E to use a primary and secondary SNTP

Server to automatically set the date and time. An accurate date and time in the 9145E assures accuracy

for events listed in the System Log and for traps and alarms sent to the system administrator. You can

choose either of two methods for setting the date and time, depending on your access to an external

network and your need for accuracy.

• For accuracy within a large network, you can set up the 9145E to synchronize the system date

and time to an SNTP server.

• The time and date can be set manually. Refer to “Set Date and Time” on page 67 for information to

set the date and time manually.

To configure SNTP, select SNTP Client Configuration (7) from the System Configuration menu and press

Enter. The Simple Network Time Protocol (SNTP) Client Configuration screen (Figure 3-19) opens.

On the SNTP client Configuration screen, type the number of the SNTP setting to change and then press

Enter.

Use the Space Bar to cycle through predetermined settings, and press Enter.

Figure 3-19 SNTP Client Configuration Screen

1. SNTP Client UTC Offset (hours) - Set the difference, in hours, between the local time of the

9145E and Coordinated Universal Time (UTC), which is similar to Greenwich Mean Time (GMT);

Range is -12 to 12

2. SNTP Client Observe DST - Enables/Disables Daylight Savings Time (Summer Time) and the

date and time it starts and ends.

3. SNTP Client Sync Interval (minutes) - Set how often, in minutes, that the 9145E tries to

synchronize its time to the SNTP server; Range is 0 (attempt to synchronize at bootup, only) to

1440 (once daily)

Canoga Perkins Corp. Ethernet Network Interface Device 22-SEP-2008

Model 9145E-101-2-0 V02.10 F121 02:59:35

---------------------------SNTP CLIENT CONFIGURATION-------------------------------

1. Sntp Client UTC Offset (hours) : 0

2. Sntp Client Observe DST : Disabled

Sntp Client DST Starts At : 01/01/1970 00:00

Sntp Client DST Ends At : 01/01/1970 00:00

3. Sntp Client Sync Interval (minutes) : 5

4. Sntp Client Delay Time (seconds) : 0

5. Sntp Server IP Address 1 : 0.0.0.0

Sntp Server Retries 1 : 3

Sntp Server Timeout 1 (seconds) : 5

Sntp Server Priority 1 : 1

6. Sntp Server IP Address 2 : 0.0.0.0

Sntp Server Retries 2 : 3

Sntp Server Timeout 2 (seconds) : 5

Sntp Server Priority 2 : 2

Select [1-5]:

---------------------------------------------Messages----------------------------------------------

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 111 112

Commentaires sur ces manuels

Pas de commentaire

Canoga-perkins 9145E Network Interface Device Software Version 2. Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Canoga-perkins 9145E Network Interface Device Software Version 2.