Canoga-perkins 9145E Ethernet Network Interface Device Hardware Manuel d'utilisateur télécharger pdf (Page 28)

9145E Ethernet Network Interface Device User’s Manual Installation

Mounting Options

Figure 3-1. Unpacking the 9145E

3.3 Mounting Options

The 9145E can be rack mounted, wall mounted, or placed on any horizontal flat surface such as

a shelf or table.

3.3.1 Rack Mounting

One 9145E can be mounted in either a 19" rack or a 23" rack, and two 9145Es can be mounted

side by side in either a 19" rack or a 23" rack. Rack mounting kits (reference Table 3-1) are avail-

able for each of the four rack mounting possibilities. Each rack mount kit contains the brackets

necessary for installing the 9145E (see Figure 3-2), as well as the mounting hardware required to

attach the brackets to the unit(s). Rack mount screws are provided by the rack manufacturer.

USER M

ANU

ALS

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

Pas de commentaire

Canoga-perkins 9145E Ethernet Network Interface Device Hardware Manuel d'utilisateur Page 28