9145E10G Ethernet Network Interface Device User’s Manual Functional Description
Management Ports
8
2.4 Management Ports
2.4.1 EIA-232 Console Port
The console port of both 9145E10G models are used for communication between the 9145E10G
and a VT100 terminal or emulator. The console port is a DE-9 female connector with a DCE pin-
out, which can be directly connected to a terminal with a straight through cable (see Figure 2-4).
Figure 2-3. EIA-232 Console Port Pinouts
2.4.2 Ethernet Management Port
The Ethernet Management port is used for remote management of the 9145E10G-527. The eth-
ernet management port has a management interface with an RJ45 UTP connector. The manage-
ment port can sense and automatically cross-over the Tx and Rx pairs.
The UTP port is IEEE 802.3 compliant for 10BASE-T and 100BASE-TX and supports the follow-
ing modes of operation:
• 10 Auto
• 100 Auto
12345
6789
TO CRAFT PORT
DCE
DE9 FEMALE
12345
6789
TO PC SERIAL PORT
DTE
DE9 MALE
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
DCD
RX DATA
TX DATA
DTR
SIG GND
DSR
RTS
CTS
RI
Commentaires sur ces manuels