Canoga-perkins CanogaOS Configuration Guide Manuel d'utilisateur Page 194

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 350
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 193
CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 194 of 350
DUT1(config-if)#no shutdown
DUT1(config-if)#ip address 4.4.4.1/24
DUT1(config-if)#exit
DUT1(config)#router rip
DUT1(config-router)#network 2.2.2.0/24
DUT1(config-router)#redistribute connected
DUT1(config-router)#end
DUT1#
(3) Configure Switch C
Switch C belongs to VPN2, Configuration the connection to switch D by using these commands.
DUT1>enable
DUT1#configure t
Enter configuration commands, one per line. End with CNTL/Z.
DUT1(config)#interface eth-0-9
DUT1(config-if)#no switchport
DUT1(config-if)#no shutdown
DUT1(config-if)#ip address 1.1.1.1/24
DUT1(config-if)#exit
DUT1(config)#interface eth-0-1
DUT1(config-if)#no switchport
DUT1(config-if)#no shutdown
DUT1(config-if)#ip address 3.3.3.1/24
DUT1(config-if)#exit
DUT1(config)#router rip
DUT1(config-router)#network 1.1.1.0/24
DUT1(config-router)#redistribute connected
DUT1(config-router)#end
(4) Configure Switch D
On Switch D, enable RIP and configure VRF
DUT1>enable
Vue de la page 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 349 350

Commentaires sur ces manuels

Pas de commentaire